Aspen Horizon 627 Lumbar Support Belt
Double-tap to zoom · drag to pan · swipe to browse
Aspen Horizon 627 Lumbar Support Belt
Choose options
- SlickTrack™ tightening system: Independently adjusts upper and lower compression.
- 4:1 mechanical advantage: Helps make tightening easier and more controlled.
- One-size adjustable design: Standard adjustment covers waist sizes from 24–50 inches (61–127 cm).
- Embroidered size indicators: Make size adjustment easier to identify.
- SlickTrack™ tightening system: Independently adjusts upper and lower compression.
- 4:1 mechanical advantage: Helps make tightening easier and more controlled.
- One-size adjustable design: Standard adjustment covers waist sizes from 24–50 inches (61–127 cm).
- Embroidered size indicators: Make size adjustment easier to identify.
About this product
Aspen Horizon 627 Lumbar Support Belt
```The Aspen Horizon 627 Lumbar Support Belt is an adjustable lower-back brace designed to provide trunk stability and targeted compression. It uses Aspen's SlickTrack™ tightening system to control the upper and lower sections separately.
In addition, the brace has a low-profile design and adjustable side panels. Therefore, one brace can be fitted across a wide range of waist sizes.
```Key Features of the Aspen Horizon 627 Lumbar Support Belt
```- SlickTrack™ tightening system: Independently adjusts upper and lower compression.
- 4:1 mechanical advantage: Helps make tightening easier and more controlled.
- One-size adjustable design: Standard adjustment covers waist sizes from 24–50 inches (61–127 cm).
- Embroidered size indicators: Make size adjustment easier to identify.
- Integrated front panels: Overlapping panels provide added support across the front of the brace.
- FlexTabs™: Help the front panels follow the body's shape and spread pressure more comfortably.
- Tri-band construction: Works with integrated vertical stays to maintain structure while allowing flexibility.
- Low-profile design: Provides structured support without unnecessary bulk.
Independent Upper and Lower Tightening
```Aspen's SlickTrack™ system lets the upper and lower parts of the brace tighten independently. As a result, compression can be adjusted more precisely than with a simple single-pull belt.
The left and right pull tabs control different areas of compression. However, users should follow the supplied Aspen fitting instructions when adjusting the brace.
```One-Size Adjustable Fit
```The Horizon 627 is designed as a one-size adjustable brace. Its standard fitting range covers waist circumferences from 24–50 inches (61–127 cm).
In addition, Aspen offers extension panels that can increase the fitting range up to 70 inches. Extension panels should only be considered included if they are listed with the exact Meddey package.
```Adjustable Size Positions
```Aspen provides four adjustment ranges within the brace. These ranges are fitting guidelines rather than separate product variants.
| Adjustment | Waist Circumference |
|---|---|
| 1 | 24–34 in (61–86 cm) |
| 2 | 32–40 in (81–102 cm) |
| 3 | 38–46 in (97–117 cm) |
| 4 | 44–50 in (112–127 cm) |
The ranges overlap because the brace is adjustable. Therefore, follow the supplied fitting instructions rather than treating these as separate sizes.
```Support That Follows the Body
```The brace uses overlapping front panels to provide support across the front of the body. In addition, Aspen's FlexTabs™ help these panels follow the user's shape.
The Tri-band system and vertical stays help maintain the brace's structure. At the same time, the design retains enough flexibility for proper fitting.
```Simple Fitting Guidance
```First, adjust the side panels to the required size position. Next, place the back panel low and centred on the lower back.
Then wrap the brace firmly around the abdomen and secure the front. Finally, use the pull tabs to adjust the upper and lower compression.
However, these steps are only a simple overview. Always follow the Aspen instructions supplied with the brace and professional guidance where required.
```Product Specifications
```| Product | Aspen Horizon 627 Lumbar Support Belt |
|---|---|
| Support Area | Lower back / lumbar area |
| Standard Fit Range | 24–50 in (61–127 cm) |
| Tightening System | SlickTrack™ 4:1 independent upper/lower tightening |
| Size Adjustment | Tool-free adjustable side panels with embroidered indicators |
| Front Panels | Overlapping integrated panels with FlexTabs™ |
| Structural System | Tri-band technology with integrated vertical stays |
Frequently Asked Questions
```What does the Aspen Horizon 627 Lumbar Support Belt do?
It provides trunk stability and targeted compression around the lower-back area. In addition, its upper and lower tightening can be adjusted independently.
What waist size does the Horizon 627 fit?
The standard adjustable range is 24–50 inches (61–127 cm). Aspen also offers extension panels for a larger fitting range.
Does the Horizon 627 have separate upper and lower adjustment?
Yes. Aspen's SlickTrack™ system independently tightens the upper and lower sections. Therefore, compression can be adjusted in each area.
Is the Aspen Horizon 627 one size?
Yes. The brace uses adjustable side panels and size indicators. As a result, one brace covers several waist-size ranges.
Are extension panels included with the brace?
Aspen offers extension panels that can increase the fitting range. However, inclusion depends on the exact package being sold, so check the Meddey listing or package contents before purchase.
Explore More Back & Lumbar Supports
```If you want to compare other support options, explore Meddey's Back & Lumbar Support collection.
```Important: Follow the instructions supplied with the Aspen Horizon 627. This support does not replace medical assessment or treatment. If the brace has been recommended for a medical condition, injury or recovery, follow the advice of the relevant healthcare professional.
You may also need
FOR YOURecommended for you
