Contec CMS5100 Patient Monitor with NIBP, SpO2 & PR

Contec CMS5100 Patient Monitor with NIBP, SpO2 & PR

The Contec CMS5100 patient monitor is a compact vital-signs monitoring system for NIBP, SpO2 and pulse rate. It supports monitoring for adult, pediatric and neonatal patients.

Moreover, the CMS5100 combines a 2.8-inch colour TFT display with configurable alarms, measurement-data storage and a rechargeable lithium-polymer battery. Therefore, healthcare users can monitor several important parameters from one compact device.

Ordering Information: Prepaid or Partial COD options are available for this product. In addition, you can call or WhatsApp +91 8586-012345 for product-related enquiries.

Key Features of Contec CMS5100 Patient Monitor

• NIBP Monitoring: Measures systolic, diastolic and mean arterial pressure using the oscillometric method.
• SpO2 Monitoring: Measures peripheral oxygen saturation and displays the SpO2 plethysmogram.
• Pulse Rate Monitoring: In addition, the device measures pulse rate during SpO2 monitoring.
• 2.8-Inch TFT Display: Displays measurements, trends, alarms and system information on a 320 × 240 colour screen.
• Visual and Audible Alarms: Moreover, users can set upper and lower alarm limits for relevant monitored parameters.
• Large Data Memory: Stores up to 2,000 groups of NIBP data and 78,000 groups of SpO2 data.
• Trend Review: Furthermore, users can review up to 24 hours of NIBP trends and 22 hours of SpO2 trends.
• Rechargeable Battery: The built-in lithium-polymer battery supports portable monitoring when mains power is unavailable.

NIBP Monitoring with the Contec CMS5100

The CMS5100 uses the oscillometric method for non-invasive blood pressure measurement. It supports manual, automatic and continuous NIBP measurement modes.

In addition, the monitor displays systolic pressure, diastolic pressure and mean arterial pressure. NIBP measurements use a resolution of 1 mmHg.

Moreover, CONTEC specifies a maximum mean error of ±5 mmHg and a maximum standard deviation of 8 mmHg for the NIBP system.

SpO2 and Pulse Rate Monitoring

The Contec CMS5100 patient monitor displays SpO2 across a measurement range of 0% to 100%. CONTEC specifies an SpO2 accuracy of ±2% from 70% to 100%.

Meanwhile, the pulse-rate function covers 25 to 250 bpm. It provides a resolution of 1 bpm.

Furthermore, the monitor displays an SpO2 plethysmogram. As a result, users can view pulse waveform information alongside the numerical readings.

Clear 2.8-Inch TFT Display

The CMS5100 includes a 2.8-inch 320 × 240 colour TFT LCD. The screen presents measurement data, trend information, alarms and system settings.

Moreover, the compact display keeps important monitoring information together in one interface. Therefore, healthcare users can review current values and recent monitoring information conveniently.

Visual and Audible Monitoring Alerts

The CMS5100 provides visual and audible alarms for monitored parameters. Users can also configure upper and lower alarm limits where supported.

For example, the system supports alarms related to systolic pressure, diastolic pressure, SpO2 and pulse rate. As a result, the monitor can alert users when measured values move beyond configured limits.

CMS5100 Data Storage and Trend Review

The monitor uses non-volatile memory for measurement storage. It can store up to 2,000 groups of NIBP data and 78,000 groups of SpO2 data.

In addition, users can review an NIBP trend graph covering up to 24 hours and an SpO2 trend graph covering up to 22 hours. Therefore, recent monitoring information remains available for convenient review.

Adult, Pediatric and Neonatal Monitoring

CONTEC lists the CMS5100 for monitoring adult, pediatric and neonatal patients. However, users must select the correct patient mode and appropriate accessories before measurement.

Therefore, healthcare users should always follow the manufacturer's operating instructions for the patient category being monitored.

Where Can the Contec CMS5100 Patient Monitor Be Used?

The CMS5100 has a compact and portable design. Therefore, CONTEC lists it for a range of medical monitoring environments, including:

• Hospitals and patient wards
• Medicine and surgery departments
• Operating rooms
• ICU and CCU environments
• Emergency rooms
• Obstetrics and gynecology departments
• Pediatric monitoring environments
• Indoor, outdoor and ambulance monitoring where appropriate

Contec CMS5100 Patient Monitor Specifications

What Comes with the Contec CMS5100?

The listed CMS5100 package includes the main monitoring accessories. Specifically, the package information includes:

• 1 × CMS5100 Patient Monitor
• 1 × User Manual
• 1 × Power Cord
• 1 × Power Adapter
• 1 × SpO2 Sensor
• 1 × Adult NIBP Cuff
• 1 × NIBP Extension Tube

However, CMS5100 configurations can vary. Therefore, confirm optional parameters or additional probes before ordering if they are specifically required.

Contec CMS5100 Patient Monitor FAQs

Shop Contec CMS5100 Patient Monitor

The Contec CMS5100 patient monitor combines NIBP, SpO2 and pulse-rate monitoring with a compact colour display, configurable alarms and measurement storage.

Moreover, its rechargeable battery and compact construction support flexible monitoring across different healthcare environments. Therefore, it offers a practical option when several basic vital signs need to be monitored from one device.

Important Use Note

Patient-monitor measurements require appropriate interpretation. Therefore, trained users should follow CONTEC's operating instructions, select the correct patient mode and use suitable accessories for each patient.