Cervical and Lumbar Digital Traction with 3 Fold Traction Table

Can You Keep This Traction Machine at Home?

Yes, some buyers may install professional physiotherapy equipment at home. However, this machine needs more care than a normal exercise device.

Therefore, a trained healthcare professional should decide whether traction is suitable. The professional should also choose the correct treatment settings.

In addition, the system includes a large 3-fold table. So, home buyers should check the available room before ordering.

If your physiotherapist has recommended a complete home traction setup, first confirm who will operate the machine. Next, measure the room and check whether the table fits comfortably.

What Does the Complete System Include?

Key Features of the Digital Traction Machine

• Cervical and lumbar use: The system supports neck and lower-back traction.
• 5–60 kg traction force: A trained professional can adjust the main traction force within this range.
• 0–54 kg base force: The operator can set a lower-force phase for intermittent traction.
• Adjustable hold time: The operator can select traction and base-force hold periods from 0–99 seconds.
• 0–99 minute treatment timer: The operator can set the required treatment duration.
• 30 stored treatment patterns: The machine can save commonly used treatment programmes.
• Digital LED display: The display shows important treatment settings during use.
• Auto-tension adjustment: The system helps maintain the selected traction force.
• Patient stop switch: The patient can stop the session if unusual discomfort develops.
• 3-fold table: The treatment table supports patient positioning during traction.

Technical Specifications

Check Your Home Space Before Buying

This system is much larger than a portable home therapy device. The listed table measures about 80 inches long and 22 inches wide.

Therefore, measure the room before ordering. Also, keep some clear space around the table for positioning and operation.

For example, a room may fit the table itself but still feel too tight for safe movement around it. So, check the full working area instead of measuring only the table.

Before buying for a home setup, check:

• Available room length and width
• Clear space around the table
• Where you will keep the traction controller
• Whether a trained operator can access the table easily
• Whether a professional has recommended cervical or lumbar traction
• Who will select and monitor the treatment settings

How Does a Digital Traction Machine Work?

A traction system applies a controlled pulling force while the patient rests on the treatment table.

First, the healthcare professional positions the patient correctly. Next, the professional chooses the required force and treatment time.

In addition, the operator can set the lower base force and hold periods. These settings help create an intermittent traction programme when needed.

During intermittent traction, the machine can move between the main traction force and a lower force. The auto-tension function also helps maintain the selected force.

However, the machine does not physically push a spinal disc back into place. It also does not permanently realign the spine.

Why Does the Machine Include a 3-Fold Table?

The table gives the patient a dedicated surface during cervical and lumbar traction.

In addition, the 3-fold design helps the practitioner prepare the required treatment position. The practitioner can then use the correct traction accessories.

For home buyers, however, the table also means you need more floor space. Therefore, room planning is an important part of the buying decision.

Cervical vs Lumbar Traction

Who May Consider This Traction System?

A household buyer may consider this system when a healthcare professional has recommended a complete traction setup at home.

However, professional users remain an important secondary audience because this is clinical physiotherapy equipment.

For example, buyers may choose it for:

• Professionally managed home rehabilitation setups
• Physiotherapy clinics
• Hospitals
• Rehabilitation centres
• Orthopaedic rehabilitation setups
• Pain-management facilities
• Physiotherapy training centres

Therefore, household customers should confirm the need with their treating professional before buying the complete system.

Traction Does Not Suit Every Neck or Back Problem

Neck and back pain can have many different causes. Therefore, traction does not suit every person with pain.

For this reason, a healthcare professional should first assess the patient. The professional can then decide whether traction belongs in the treatment plan.

Also, do not start traction only because someone has a slipped-disc, sciatica or back-pain diagnosis. The diagnosis alone does not tell you whether traction is suitable.

Why Is the Patient Stop Switch Important?

The machine includes a hand-held patient stop switch.

Before the session starts, the professional should explain how to use it. Then, the patient can stop the treatment if unusual discomfort develops.

However, the stop switch does not replace professional monitoring. It works as an additional safety control.

What to Check Before Buying a Digital Traction Machine with Table

Before buying a digital traction machine with table, compare the product with your actual treatment and space requirements.

In particular, check:

• Whether a professional has recommended cervical or lumbar traction
• Who will operate the machine
• Available floor space
• 5–60 kg traction-force range
• 0–54 kg base-force control
• 30-program memory
• Treatment timer and hold-time controls
• Patient stop switch
• 3-fold table dimensions
• Warranty and after-sales support

Therefore, do not choose the system only by price. Instead, check the setup, available space, professional guidance and required features.

Frequently Asked Questions